>
Replacement |
1. |
Remove the safety belt (A) by turning it in the direction of arrow using a flat-head screwdriver. |
2. |
Remove the front seat track mounting cover. |
3. |
After loosening the mounting bolts and nuts, remove the front seat assembly (A).
|
4. |
Disconnect the front seat integration connector (A).
[Driver's]
[Passenger's] |
5. |
Disconnect the rear monitor image cable connector (A). |
6. |
Install in the reverse order of removal.
|
AUX jack Repair procedures
Removal
1.
Remove the floor console upper tray.
(Refer to Body - "Floor Console Assembly")
2.
Remove the center fascia lower tray.
(Refer to Body - "Center fascia pannel")
3.
Remove the ...
Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none
of the following conditions apply.
If any of the following conditions apply, follow Maintenance Under Severe Usage
...
Curtain Airbag (CAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Disconn ...