Hyundai Equus: Front Impact Sensor (FIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
| Description |
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary purpose of the Front
Impact Sensor (FIS) is to provide an indication of a collision. The
Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
See also:
AVN Antenna Components and Components Location
Components
...
TPMS Sensor Description and Operation
Description
1.
General description
(1)
WU is a sensor placed in the tire that reports pressure and temperature.
(2)
The WU is mounted inside the wheels, fixed to the valve. The angle between ...
Rear cross traffic alert
When your vehicle moves backwards from a parking position, the sensor detects
approaching vehicles to the left or right side direction and gives information to
the driver.
Operating condition ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com