Hyundai Equus: Front Impact Sensor (FIS) Components and Components Location

Front Impact Sensor (FIS) Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Impact Sensor (FIS) Repair procedures

Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connec ...

See also:

Inhibitor Switch Specifications
Specifications x Type: Combination of output signals from 4 terminals Power supply (V)12Output typeCombination of output signals Signal Code Table PIN No.PP-RRR-NNN-DDS112V12VO ...

Middle Speed Sensor Repair procedures
Inspection 1. Check signal waveform of middle speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

User Settings Mode
HUD Settings (if equipped) Display Height Adjust the height of the HUD image on the windshield glass (Level 0 to 20). Illumination Adjust the intensity of the HUD illumination (Level 0 to 20). ...