>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
(Refer to Body - "Bumper") |
3. |
Remove the front fog lamp assembly (A) after loosening screws. |
Installation |
1. |
Install the front fog lamp assembly. |
2. |
Connect the front fog lamp connector. |
3. |
Install the front bumper cover. |
Wheel nut tightening torque:
Steel wheel & aluminum alloy wheel: 65~79 lb·ft (9~11 kg·m)
If you have a tire gauge, remove the valve cap and check the air pressure. If
the pressure is lower than recommended, drive slowly to ...
Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother
high speed ride. The radial- ply tires used on this vehicle are of belted construction,
and are selected to comple ...
Parking Assist Sensor Schematic Diagrams
Circuit diagram
...