>
Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Remove the door outside belt weatherstrip. |
3. |
Remove the plug hole (A).
|
4. |
Remove the outside belt weatherstrip (C). |
5. |
Carefully adjust the front door window glass (B) until you
can see the bolts, then loosen them. Separate the glass from the glass
run and carefully pull the glass out through the window slot.
|
6. |
Install in the reverse order of removal.
|
Relay Box (Engine Compartment) Components and Components Location
Component Location
...
Front Strut Assembly Components and Components Location
Components
1. Insulator cap2. Insulator assembly3. Spring upper pad4. Dust cover 5. Bump stopper6. Coil spring7. Spring lower pad8. Shock absorber
...
Steering Wheel Remote Controller (SWRC) Repair procedures
Inspection
1.
Check for resistance between terminals in each switch position.
[LH Top (Audio)]
SwitchConnectorterminalResistance(±5%)Volume Down6-7240 xSeek Down510 xMode940 xVolume Up1.69 kxSee ...