>
Replacement |
1. |
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass") |
2. |
Remove the front door outside handle.
(Refer to Front Door - "Front Door Outside Handle") |
3. |
Loosen the front door outside handle base mounting screw (A). |
4. |
Using a screwdriver or remover, remove the extension cover (A). |
5. |
Disconnect the outside rear view mirror connector (A). |
6. |
Loosen the front door latch (B) mounting screws. |
7. |
After loosening the mounting bolts, then remove the front door module (A).
|
8. |
Disconnect the connectors (A) and front door module wiring harness (B) from the front door module. |
9. |
Install in the reverse order of removal.
|
Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver
while driving.
It senses the rear side territory of the vehicle and provides information to
the driver.
(1) BSD (B ...
Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid should be between MAX and MIN marks on the side
of the gauge at the normal tempe ...
Passenger Airbag (PAB) Module Components and Components Location
Components
...