>
Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Disconnect the front door inside handle lamp connector (A). |
3. |
After loosening the mounting screws, then remove the front door inside handle (B). |
4. |
Install in the reverse order of removal.
|
General Information
General
1.
Basically, all measurements in this manual are taken with a tracking gauge.
2.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3.
...
Front Door Window Glass Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the door outside belt weatherstrip.
3.
Remove the plug hole (A).
• ...
Knock Sensor (KS) Specifications
Specification
ItemSpecificationCapacitance (pF)950 ~ 1,350
...