>

Hyundai Equus: Fluid Components and Components Location - Hydraulic System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Fluid Components and Components Location

Components Location

1. Oil injection hole
2. Oil level check plug
3. Oil drain piug

    Oil Pump Components and Components Location
    Components Location 1. Oil seal2. Reaction shaft3. Housing4. Cover5. O-Ring6. Reaction shaft7. Snap ring8. Needle bearing9. 8LR/B return spring10. 8LR/B piston ...

    Fluid Repair procedures
    Service Adjustment Procedure Oil level Check     A check of ATF level is not normally required during scheduled services. If an oil leak is found, perform the oil level chec ...

    See also:

    Front Seat Belt Pretensioner Components and Components Location
    Component Location 1. Front seat belt pretensioner ...

    Keep paint and trim in good condition
    Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a ...

    Knock Sensor (KS) Description and Operation
    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knockin ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com