Hyundai Equus: External AMP Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Premium AVN System / External AMP Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Premium AVN System / External AMP Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Open the trunk, remove the right trunk trim.
(Refer to Body - "Trunk Trim") |
| 3. |
Remove the external amplifier after disconneting the connector (A) and loosening the mounting nuts (B).
|
| Installation |
| 1. |
Install the external amplifier after connecting the connector. |
| 2. |
Install the right trunk trim. |
| 3. |
Connect the negative (-) battery terminal.
|
External AMP Components and Components Location
Components
Connector Pin Information
No.Connector AConnector BConnector C 1B (+)Right surround (+)right rear door (+)2B (+)Left surround (+)left rear door (+)3B (+)Rear right midrange/tweeter (+)R ...
See also:
Limitations of the system
The smart cruise control system may have limits to its ability to detect distance
to the vehicle ahead due to road and traffic conditions.
On curves
On curves, the smart cruise control syst ...
Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com