Hyundai Equus: ESP(Electronic Stability Program) System

EPB Switch Repair procedures

Removal 1. Turn ignition switch off and disconnect the battery (-) cable from the battery 2. Remove the driver side crash pad side cover. (Refer to Body - "Crash Pad") 3. Remove the cra ...

Components and Components Location

Components 1. ESP control module (HECU)2. Steering angle sensor3. Rear wheel speed sensor4. Sensor cluster (Yaw rate & Lateral)5. Front wheel speed sensor ...

See also:

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" ...

Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the warm (Driver's side) ...

Detecting sensor
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...