>
Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Disconnect the front door inside handle lamp connector (A). |
3. |
After loosening the mounting screws, then remove the front door inside handle (B). |
4. |
Install in the reverse order of removal.
|
Starter Components and Components Location
Components
1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assemb ...
Front Air Strut Assembly Description and Operation
Description
The air spring & damper is one unit so that it is not possible to make separation.
The average pressure of front air spring is around 7.5 bar.
When the front air spring is delive ...
Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly
inflated or on slippery road surfaces. Tires should be replaced when tread wear
indicators appear. To reduce the ...