>

Hyundai Equus: Trunk Lid Back Panel Repair procedures - Trunk Lid - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Trunk Lid Back Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the trunk lid trim.
(Refer to Trunk Lid - "Trunk Lid Trim")
2.
Loosen the mounting nut, remove the trunk lid panel (A).

3.
Install in the reverse order of removal.
   
Make sure the connector are connected in properly.
Replace any damaged clips.
    Trunk Lid Back Panel Components and Components Location
    Component Location 1. Trunk lid back panel ...

    Trunk Lid Weatherstrip Repair procedures
    Replacement 1. Remove the trunk lid weatherstrip (A).     • Do not apply sealant to the body. 2. Install in the reverse order of removal.     • ...

    See also:

    Components and Components Location
    Component Location Index Engine Room 1. Receiver-drier2. Condenser3. Ambient Temperature Sensor4. Compressor5. Discharge Hose6. Suction & Liquid Tube Assembly7. Service Port (Low Pressure)8. ...

    Schematic Diagrams
    Schematic Diagram ...

    LCD Display Control
    The LCD display modes can be changed by using the control buttons on the steering wheel. (1) button : Changing LCD modes (right to left), or returning to previous position (2) button : Chan ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com