>

Hyundai Equus: Trunk Lid Key Holder Repair procedures - Trunk Lid - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Trunk Lid Key Holder Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the trunk lid trim.
(Refer to Trunk Lid - "Trunk Lid Trim")
2.
Loosen the trunk lid key holder mounting bolts.
3.
Disconnect the trunk lid key holder cable (A) and remove the trunk lid key holder (B).

Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

4.
Install in the reverse order of removal.
   
Make sure the trunk lid locks/unlocks and opens/closes properly.
Replace any damaged clips.
    Trunk Lid Latch Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protec ...

    Trunk Lid Back Panel Components and Components Location
    Component Location 1. Trunk lid back panel ...

    See also:

    TPMS Receiver Repair procedures
    Replacement     When the receiver first arrives for replacement: 1) It will be in Virgin State. 2) It will not have any sensor ID's memorized.     It ...

    High Mounted stop lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear package trim (A). (Refer to Body - "Interior trim") 3. Remove the high mounted stop lamp (A) after removing sc ...

    Front Door Window Glass Components and Components Location
    Component Location 1. Front door window glass ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com