>
Hyundai Equus Manuals

Hyundai Equus: Trunk Lid Trim Repair procedures - Trunk Lid - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Trunk Lid Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Trim Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Detach the clips, then remove the trunk lid side cover (A).

2.
Using a screwdriver, remove the trunk lid switch (A), and disconnect the connector.

3.
Detach the clip, then remove the trunk lid cover A).

4.
Remove the trunk lid overslam bumpers (A).
5.
After loosening the mounting screw and clips, then remove the trunk lid trim (B).

6.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Trunk Lid Trim Components and Components Location
    Component Location 1. Trunk lid trim ...

    Trunk Lid Latch Components and Components Location
    Component Location 1. Trunk lid latch ...

    See also:

    Ambient Temperature Sensor Description and Operation
    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

    AVN Antenna Components and Components Location
    Components ...

    Coolant Repair procedures
    Engine Coolant Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com