>
Hyundai Equus Manuals

Hyundai Equus: Hood Assembly Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Hood Assembly Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Repair procedures

Replacement
   
•
Be careful not to damage the hood and body.
   
•
When removing and installing the hood, an assistant is necessary.
•
When removing the clips, use a clip remover.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).

2.
After loosening the hood hinge (A) mounting bolts, remove the hood assembly (B).
Tightening torque :
21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)

3.
Installation is the reverse of removal.
   
•
Make sure the hood locks/unlocks and opens/closes properly.
•
Adjust the hood alignment.
    Hood Assembly Components and Components Location
    Component Location 1. Hood assembly ...

    Hood Lift Repair procedures
    Replacement     • When removing and installing the hood lifter, an assistant is necessary. • When removing the clips, use a clip remover. 1. Using a screwdriver (A ...

    See also:

    Rear Wheel House Trim Components and Components Location
    Component Location 1. Rear wheel house trim ...

    Special Service Tools
    Special Service Tools Tool(Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Deployment adapter0957A-3F100Use with deployment tool.(SAB)Deployment adapter0957A-3Q10 ...

    Oil Pump Repair procedures
    Removal 1. Remove the sub frame. (Refer to SS group) 2. Drain engine oil. (1) Remove the oil filler cap. (2) After lifting the car, remove the oil drain plug and drain oil into a conta ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com