Hyundai Equus: Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
| Replacement |
|
|
| 1. |
Loosen the front wheel guard mounting clip and screws.
|
| 2. |
Loosen the mounting screws and clips, remove the side sill garnish. |
| 3. |
Loosen the bumper side mounting screw, disconnect the side's bumper (A).
|
| 4. |
Loosen the mounting screws, remove the front bumper side mounting bracket. |
| 5. |
Loosen the fender mounting bolts, remove the fender (A).
|
| 6. |
Install in the reverse order of removal.
|
Components and Components Location
Component Location
1. Fender assembly
...
Hood
...
See also:
Spark plugs
Make sure to install new spark plugs of the correct heat range. ...
Removable towing hook (if equipped)
1.Open the trunk, and remove the towing hook from the tool case.
2.Remove the hole cover by pressing the lower part of the cover on the front
or rear bumper.
3.Install the towing hook by turning ...
Center Control Panel (CCP) Repair procedures
Removal
Front Keyboard Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly")
3.
Disconnect the connect ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com