Hyundai Equus: Limousine Interior
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Limousine Interior
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Limousine Interior
| Interior A |
|
|
|
| Front inner pillar tooling hole (O9) | Cowl cross bar mounting hole (O11) | Front door checker mounting hole (O11) |
|
|
|
| Side sill inner reinforcement tooling hole (O7) | Seat belt height adjuster upper mounting hole (O15) | Seat belt height adjuster lower mounting hole (O15) |
|
| |
| Seat belt pretensioner mounting hole (O12) | Rear door checker mounting hole (O11) |
| Interior B |
|
|
|
| Front inner pillar tooling hole (O9) | Cowl cross bar mounting hole (O11) | Side sill inner reinforcement tooling hole (O7) |
|
|
|
| Seat belt height adjuster upper mounting hole (O15) | Seat belt height adjuster lower mounting hole (O15) | Seat belt pretensioner mounting hole (O12) |
| ||
| Front seat cross member tooling hole (O10) |
| Interior C |
|
|
|
| Seat belt height adjuster upper mounting hole (O15) | Seat belt height adjuster lower mounting hole (O15) | Seat belt pretensioner mounting hole (O12) |
|
|
|
| Rear door checker mounting hole (O11) | Quarter inner panel tooling hole (O9) | Quarter inner panel tooling hole (O6.6) |
|
|
|
| Rear door striker mounting hole (O12.8) | Quarter inner panel tooling hole (O12) | Floor panel tooling hole (O16) |
| Interior D |
|
|
|
| Seat belt height adjuster upper mounting hole (O15) | Seat belt height adjuster lower mounting hole (O15) | Seat belt pretensioner mounting hole (O12) |
|
|
|
| Quarter inner panel tooling hole (O9) | Quarter inner panel tooling hole (O6.6) | Quarter inner panel tooling hole (O12) |
| ||
| Floor panel tooling hole (O9) |
| Interior E |
|
|
|
| Rear package tray panel tooling hole (O9) | Floor panel tooling hole (O9) | Floor panel tooling hole (O6.6) |
| ||
| Spare tire well tooling hole (O6.6) |
Limousine Side Body
Side body A
Front side member tooling hole (O8)Fender apron panel tooling hole (O7)Front door hinge upper mounting hole (O13)Front door hinge lower mounting hole (O13) Fender mounting hole (O6.6 ...
Limousine Rear Body
Rear body
Roof panel rear cornerSide outer panel rear cornerRear parkage tray panel tooling hole(O23)Side outer panel rear cornerTooling hole (14X10)Tooling hole (O10)
...
See also:
Fuel Pressure Control Valve Description and Operation
Description
Fuel Pressure Control Valve is installed on the high pressure
fuel pump and controls fuel flow flowing into the injectors in
accordance with the ECM signal calculated based on vario ...
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed contro ...
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com