>
Inspection |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable |
2. |
Remove the crash pad side cover. |
3. |
Remove the lower panel.
(Refer to Body - "Crash Pad") |
4. |
Remove the lower crash pad switch assembly by using the scraper and then disconnect the connectors. |
5. |
Check the continuity between the switch terminals as the ESP OFF switch is engaged. |
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1.Pull off the road ...
Height Adjust Components and Components Location
Component Location
1. Height adjust
...
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Loosen the airbag module mounting bolts (2EA).
3.
Remove the wiring fixing c ...