>
Replacement |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable |
2. |
Remove the floor console.
(Refer to Body - "Console") |
3. |
Disconnect the yaw rate & lateral G sensor connector. |
4. |
Remove the mounting bolts (A).
|
5. |
Installation is the reverse of removal. |
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
Description and Operation
Description
Front blind camera is a supplemental system that shows blind spot in front of the vehicle through the AV monitor.
The front blind camera will operate when you push the button
and shi ...
Steering gear box, linkage & boots/lower arm ball joint
With the vehicle stopped and engine off, check for excessive free-play in the
steering wheel.
Check the linkage for bends or damage. Check the dust boots and ball joints for
deterioration, cracks ...