>
Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable |
2. |
Remove the Engine room junction box after removing the cover. |
3. |
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.
|
4. |
Pull up the lock (A) of the ESP control unit connector, then disconnect the connector. |
5. |
Loosen the 3 ESP HECU bracket bolts, then remove HECU and bracket.
|
6. |
Remove the 3 bolts, then remove the bracket from HECU.
|
Installation |
1. |
Installation is the reverse of removal. |
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering
wheel.
1) button : Changing LCD modes
(right to left), or returning to previous position
(2) but ...
Front Seat Cushion Cover Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Driving in the rain
Rain and wet roads can make driving dangerous, especially if you’re not prepared
for the slick pavement.
Here are a few things to consider when driving in the rain:
A heavy rainfall will ma ...