>
Removal |
1. |
Turn ignition switch off and disconnect the battery (-) cable from the battery |
2. |
Remove the driver side crash pad side cover.
(Refer to Body - "Crash Pad") |
3. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad") |
4. |
Remove the EPB switch after removing 4 screws from the crash pad lower panel. |
Inspection |
1. |
Measure resistance between EPB switch terminals as below. |
1. |
Measure resistance between Auto Hold switch terminals as below. |
Installation |
1. |
Install EPB switch assembly. |
2. |
Connect the crash pad switch assembly connector to EPB switch. |
3. |
Install the crash pad lower panel.
(Refer to Body - "Crash Pad") |
4. |
Install the driver side crash pad side cover.
(Refer to Body - "Crash Pad") |
Exterior overview
1. Towing hook
2. Hood
3. Front windshield wiper blades
4. Sunroof
5. Outside rearview mirror
6. Door locks
7. Tires and wheels
8. Headlamps
9. Front fog light
1. Glass antenna and Defr ...
Front Pillar Trim Components and Components Location
Component Location
1. Front pillar trim
...
CVVT Oil Control Valve (OCV) Specifications
Specification
ItemSpecificationCoil Resistance (x)6.9 ~ 7.9 [20°C(68°F)]
...