>
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash after 10 seconds.
2. Release both buttons. Do not hold for longer than 20 seconds.
The Integrated HomeLink® Wireless Control System is now in the training (learn) mode and can be programmed at any time following the appropriate steps in the Programming sections above.
FCC ID: NZLTLMHL4 IC: 4112A-TLMHL4
Air bag
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
(5) Driver’s knee air bag
WARNING
Even in vehicles with air bags, you and your passengers m ...
ON/OFF Solenoid Valve Description and Operation
Description
ON/OFF solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. ...
Steering Wheel Remote Controller (SWRC) Components and Components Location
Components
1. Left Top Remote Control Switch (Audio)2. Right Top Remote Control Switch (Haptic)3. Left Bottom Remote Control Switch (Bluetooth+LDWS+Mute)4. Right Bottom Remote Control Switch (Cru ...