>
Components |
1. |
Full Retraction
Maintains a more safe posture by strongly rewinding the seat belt right before a crash.
[Operation Condition]
|
2. |
Dynamic Support
Stabilizes the driver from foward and centrifugal force by rewinding the seat belt during sudden braking or turning.
[Operation Condition]
|
3. |
Haptic Warning
Warns the driver with seat belt vibration when the vehicle gets out of its lane or any other dangerous situation occurs.
[Operation Condition]
|
4. |
Slack Removal
If the seat belt isn’t completely fastened, it will not
work normally in a vehicle crash situation. In this case, this system
completely fastens the seat belt by winding the belt slightly when the
vehicle speed reaches 40kph. |
5. |
Seat Belt Parking
After the seat belt is released, it returns the seat belt to its original position in 3 seconds by retracting the belt.
However, this function does not work when the belt has already returned to its original position. |
1) |
The lamp is turned on continuously when the ignition switch is in the ON position. |
2) |
The lamp turns on while driving. |
Repair procedures
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
...
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. ...
Good braking practices
WARNING
Whenever leaving vehicle or parking, always set the parking brake as
far as possible and fully engage the vehicle's transmission into the park position.
Vehicles not fully engage ...