>
Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the safety belt (A) by turning it in the direction of arrow using a flat-head screwdriver. |
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center Pillar Trim") |
4. |
Remove the center pillar upper trim.
(Refer to Body - "Center Pillar Trim") |
5. |
After loosening the mounting bolt, then remove the front seat belt lower anchor (A).
|
6. |
Loosen the front seat belt webbing guide (A) mounting bolts. |
7. |
After disconnecting the pretensioner connector lock pin,
remove the front seat belt pretensioner connectors (A), loosen the
mounting bolts, then remove the front seat belt pretensioner (B).
|
Installation |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Install in the reverse order of removal. |
4. |
Reconnect the battery negative cable. |
5. |
After installing the seat belt pretensioner, confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should turn on for about six seconds and then go off. |
Components and Components Location
Component Location
1. Rear curtain2. Rear curtain switch (Floor console upper cover)3. Body Control Module (BCM)4. Rear seat curtain switch5. Rear door curtain6. Rear door module
...
Specifications
Specifications
ContentValueAFLSNominal VoltageDC 13.5VMax VoltageDC 18.5VRated VoltageDC 10~16VOperating Temperature-40°C ~ +85°COperating CurrentMAX. 200mA
...
5 seater
Refer to your vehicle’s tire and loading information label for specific information
about your vehicle's capacity weight and seating positions.
The combined weight of the driver, p ...