Hyundai Equus: Side Impact Sensor (SIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
| Description |
The Side Impact Sensor (SIS) system consists of two kinds of
side impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors which are installed in the
rear pillar (left and right).
| • |
The Front Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location. |
| • |
The Rear Side Impact Sensor is also called A-SIS because it detects acceleration due to collision at its mounting location. |
SRSCM decides deployment of the airbag and the time of
deployment through the collision signal of the SIS when collision
occurrs.
Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connec ...
Side Impact Sensor (SIS) Components and Components Location
Components
...
See also:
Power outlet
The power outlet is designed to provide power for mobile telephones or other
devices designed to operate with vehicle electrical systems. The devices should
draw less than 10 amps with the engin ...
Limousine Rear Body
Rear body
Roof panel rear cornerSide outer panel rear cornerRear parkage tray panel tooling hole(O23)Side outer panel rear cornerTooling hole (14X10)Tooling hole (O10)
...
Refrigerant Line Repair procedures
Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out of the sys ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com