>
Replacement |
1. |
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. |
2. |
Turn the steering wheel so that the front wheels can face straight ahead. |
3. |
Remove the airbag module.
(Refer to Restraint - "Airbag Module") |
4. |
Loosen the lock nut. |
5. |
Remove the steering wheel (A) from the steering column shaft by using a SST (09561-11001).
|
6. |
Loosen the screw and then remove the steering column shroud (A). |
7. |
Disconnect the connector and then remove the clock spring (A).
|
8. |
Loosen the screw and then remove the multifunction switch (A). |
9. |
Loosen the screw and then remove the crash pad lower panel (A).
(Refer to Body - "Crash Pad") |
10. |
Loosen the nut and then remove the lower panel bracket (A). |
11. |
Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.
|
12. |
Loosen the nuts and then remove the steering column dust cover (A). |
13. |
Disconnect all connectors connected to the steering column assembly. |
14. |
Remove the steering column assembly by loosening the mounting bolts and nuts.
|
15. |
Installation is the reverse of the removal.
|
Inspection |
1. |
1. Check if the battery is fully charged before EHPS type recognition. |
2. |
2. Be careful not to disconnect any cables connected to the vehicle or scan tool during EHPS type recognition |
3. |
3. When the EHPS type recognition is completed, turn the
ignition switch off and wait for several seconds, then start the engine
to confirm normal operation of the vehicle |
1. |
1. Select "EPS Variant Coding". |
2. |
2. Proceed with the test according to the screen introductions. |
Passenger Airbag (PAB) Module Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad
and protects the front passenger in the event of a frontal crash. The
SRSCM determines if and when to deploy the PAB.
...
Description and Operation
Description
Burglar Alarm State [B/A State]
B/A StateDescriptionDISARM
1.
In "DISARM" state, no vehicle start inhibition. So, when
door, hood, or Tailgate is opened, there is no alarm sound ...
Repair procedures
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and replace them if necessary.
1.
Remove the front door trim.
(Refer to Fro ...