>
Replacement |
When the receiver first arrives for replacement:
|
It is important to make sure that the correct receiver is
used to replace the faulty part i.e. it must be High Line (95800-3N200)
in order to have the correct inflation warning thresholds set. |
1. |
Disconnect vehicle battery. |
2. |
Remove the crash pad.
(Refer to BD - "Crash Pad") |
3. |
Remove faulty part and fit bracket assembly to new part. |
4. |
Secure new part to vehicle and fit connector. |
5. |
Re-connect battery and turn Ignition on.
Vehicle Name Writing
VIN Writing |
Climate Seat Unit Schematic Diagrams
Circuit Diagram
...
Compass Mirror Repair procedures
Adjustment
Calibration procedure
If the display read "C", calibrate the compass.
1.
Driving the vehicle in a circle at less than 8km/h 3 times or until the compass heading appears.
2.
Drivin ...
Inside Rear View Mirror Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...