>
Removal |
1. |
Remove the rear wheel & tire.
|
2. |
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.
|
3. |
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.
|
4. |
Installation is the reverse of removal. |
Change to "winter weight" oil if necessary
In some climates it is recommended that a lower viscosity "winter weight" oil
be used during cold weather. See section 8 for recommendations. If you aren't sure
what weight oil you s ...
Bag hanger (if equipped)
Pull the strap (1) to hang a bag on the hook (2).
When you are not using the hook, fold the hook. ...
Refrigerant Line Repair procedures
Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out of the sys ...