Hyundai Equus: G Sensor Components and Components Location

Height Sensor Repair procedures

Removal [Front Height Sensor]     • Avoid suffering excessive impact. • Do not entering the water into pin inside. • Take care not to be damaged height sensor witc ...

G Sensor Description and Operation

Description There are a total of 3 acceleration sensors in the vehicle that measure vehicle acceleration and communicate with the ECS ECU. The ECS ECU calculates the vertical vibration speed, ...

See also:

Rear Variable Damper Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

Recalling Position into Memory
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button is in the ON position. 2. Press the desired memory button (1 or 2). The system will beep once, then the driver's ...

Fuel Sender Assembly Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. "Release the residual pressure in fuel line. (Refer to Fuel Delivery System -""Release Residual Pres ...