>
Removal |
1. |
Remove the rear wheel & tire.
|
2. |
Disconnect the rear shock absorber (A) from the rear axle by loosening the bolt.
|
3. |
Loosen the mounting bolt (A) and then remove the rear shock absorber.
|
4. |
Installation is the reverse of removal. |
Inspection |
1. |
Check the components for damage or deformation. |
2. |
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation. |
1. |
Fully extend the piston rod. |
2. |
Drill a hole on the (A) section to discharge gas from the cylinder.
|
Compass function
The Compass can be turned ON and OFF and will remember the last state when the
ignition is cycled. To turn the display feature ON/OFF:
1. Press and release the button
to turn the display feature ...
ECU Description and Operation
Description
Analyzes each variety sensor and communication data and executes air suspension control.
That part controls system and maintains function. ...
Components and Components Location
Components
1. Receiver
...