Hyundai Equus: Rear Variable Damper Schematic Diagrams

Rear Variable Damper Description and Operation

Description The rear variable damper consists of a damper and an upper mounting bracket. This damper determines vehicle behavior through the acceleration sensor in the ECS ECU, and it adjusts ...

Rear Variable Damper Repair procedures

Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

See also:

Intake Actuator Description and Operation
Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...

Before starting
Close and lock all doors. Position the seat so that all controls are easily reached. Adjust the inside and outside rearview mirrors. Be sure that all lights work. Check all gauges. Check ...

Lane departure warning system (LDWS) (If equipped)
This system detects the lane with the sensor at the front windshield and warns you when your vehicle leaves the lane. WARNING The LDWS does not make the vehicle change lanes. It is the driver ...