>

Hyundai Equus: Rear Stabilizer Bar Repair procedures - Rear Suspension System - Suspension System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Rear Stabilizer Bar Repair procedures

Removal
1.
Remove the rear wheel and tire (A) from rear hub .

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

   
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.
Disconnect the rear stabilizer link (B) from the rear lower arm by loosening the nut (A)

Tightening torque:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

3.
Loosen the mounting bolt (A) and then remove the stabilizer bar (B).

Tightening torque:
45.0 ~ 55.0 N.m(4.5 ~ 5.5 kgf.m, 33.0 ~ 40.0 lb-ft)

4.
Disconnect the rear stabilizer link (B) with the stabilizer bar (A).

Tightening torque:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

5.
Install in the reverse order of removal.
Inspection
1.
Check the bushing for wear deterioration.
2.
Check the all bolts.
3.
Check the stabilizer bar for deformation.
    Rear Lower Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

    Air Suspension System
    ...

    See also:

    Middle Speed Sensor Repair procedures
    Inspection 1. Check signal waveform of middle speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Cylinder Head Repair procedures
    Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal ...

    Multi Function Switch(MFSW) Description and Operation
    Description 1. Multi Function Switch (MFSW) (1) Main features ItemDescriptionInstallation location Multi Function Switch (right)Component configuration 1. ECU 2. CAN Communication IC: B ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com