1. |
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
|
• |
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A). |
|
|
2. |
Disconnect the rear stabilizer link (C) & height sensor (B) from the rear lower arm by loosening the nut (A).
Tightening torque
Height sensor : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Stabilizer link : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
|
|
3. |
Loosen the bolt (A), nuts (B), flange bolt (C), lock nuts (D).
Tightening torque
Axle : 140.0 ~ 160.0 N.m (14.0 ~ 16.0 kgf.m, 101.0 ~ 116.0 lb-ft)
Damper : 140.0 ~ 160.0 N.m (14.0 ~ 16.0 kgf.m, 101.0 ~ 116.0 lb-ft)
|
|
4. |
Install in the reverse order of removal. |
5. |
Check the alignment.
(Refer to Tires/Wheels - "Alignment") |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the rear lower arm deformation. |
4. |
Check the coil spring pad for deterioration and deformation. |
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
Be careful not to damage t ...
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
Be careful not to damage t ...