>
Removal |
1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
Remove the split pin and castle nut (A).
|
3. |
Disconnect the rear assist arm with the rear carrier using a SST (09568-2J100). |
4. |
Disconnect the rear assist arm (B) from the rear sub frame by loosening the bolt & nut (A).
|
5. |
Install in the reverse order of removal. |
6. |
Check the alignment.
(Refer to Tires/Wheels - "Alignment")
|
Inspection |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the ball joint for rotating torque. |
3. |
Check the assist arm for deformation. |
Sedan Rear Body
Rear body
Roof panel rear cornerSide outer panel rear cornerRear parkage tray panel tooling hole(O23)Side outer panel rear cornerTooling hole (14X10)Tooling hole (O10)
...
Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many miles (kilometers) you can get from a
gallon (l ...
Components and Components Location
Components
1. Front bumper cover2. Radiator grill upper guide
...