>
Replacement |
1. |
Removal the front wheel & tire.
|
2. |
Disconnect the stabilizer link (A) from the front strut assembly by loosening the nut.
|
3. |
Disconnect the stabilizer bar (A) from the front sub frame by loosening the bolt.
|
4. |
Installation is the reverse of removal. |
Inspection |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the ball joint for rotating torque. |
Rear Seat Frame Assembly Components and Components Location
Component Location
1. Rear seat frame assembly [LH]2. Rear seat frame assembly [RH]
...
6 Speed Clutch Control Solenoid Valve Specifications
Specifications
Direct control VFS[6/C]
x Control type : Normal low type
Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistance( ...
Power Trunk Module Drive Unit Repair procedures
Removal
•
When removing and installing the trunk lid, an assistant is necessary.
•
Take care not to be closed the trunk when removing the push rod.
•
Wear glove ...