>
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, then the
driver's seat, outside rearview mirrors, steering wheel and HUD (Head-Up Display)
height will automatically adjust to the stored positions.
Pressing one of the control buttons for the driver’s seat, the outside rearview mirrors, or the steering wheel while the system is recalling the stored positions will cause the movement for that component to stop and move in the direction that the control button is pressed. Other components will continue to the recalled position.
WARNING
Use caution when recalling adjustment memory while sitting in the vehicle. Push the seat position control knob to the desired position immediately if the seat moves too far in any direction.
Assist Handle Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Photo Sensor Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will ri ...
Fuel requirements
Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL,
as well as minimize exhaust emissions and spark plug fouling.
Your new vehicle is designed to use only unleaded fuel h ...