>
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2. Adjust the driver’s seat, outside rearview mirrors, steering wheel and HUD (Head-Up
Display) height to positions comfortable for the driver.
3. Press the SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 5 seconds after pressing the
SET button. The system will beep twice when the positions of the driver's seat,
outside rearview mirrors, steering wheel and HUD (Head-Up Display) height have been
successfully stored.
Power Seat Module(PSM) Description and Operation
Description
1.
Power Seat Module (PSM)
(1)
Main features
ItemDescriptionInstallation location Lower section of the driver side seatComponent configuration
1.
Embedded with CAN Communication ...
Description and Operation
Description
Automatic transmission system relies on various measurement
data to determine the current control status and extrapolate the
necessary compensation values. These values are used to ...
VSM OFF Switch Components and Components Location
Components
1. Smart cruise control switch2. AVSM OFF lamp (Supervision type)3. AVSM OFF lamp (Standard type)
...