>
This system is provided to store and recall the driver's seat, outside rearview mirrors, steering wheel positions and HUD (Head-Up Display) height. If the battery is disconnected, the position memory will be lost and the driving positions must be stored in the system again. If the memory system does not operate normally, have the driver position memory system checked by an authorized EQUUS dealer.
WARNING
Never attempt to operate the driver position memory system while driving. This may cause loss of vehicle control resulting in an accident.
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Crankshaft Position Sensor (CKPS) Schematic Diagrams
Circuit Diagram
...