>
Removal |
1. |
Remove the center console.
(Refer to Body - " Floor Consol") |
2. |
Disconnect the sports mode connector (A). |
3. |
Remove the shift cable assembly (A) from the shift lever assembly. |
4. |
Remove the shift lever assembly (A) by removing the bolts.
|
5. |
Remove the clip (C ). |
6. |
Remove the shift cable (A) from the inhibitor by removing the nut (B).
|
7. |
Remove the shift cable assembly (B) by removing the nuts (A).
|
Installation |
1. |
Install in the reverse order of removal. |
Adjustment |
How To Adjust Shift Cable |
1. |
Insert the shift cable to the bracket and hold it with a new clip. |
2. |
Align the manual lever hole to the hole on the transmission case and hold the position with a bar. |
3. |
Eliminate shift cable free play of the shift cable. |
4. |
Firmly hold the special bolt with a spaner and tighten the nut (A) with the specified torque.
|
5. |
Take off the bar holding the manual lever. |
6. |
Shifting the each position, check that the shift lever moves smoothly.
|
Occupant classification system
Your vehicle is equipped with an occupant classification system in the front
passenger's seat.
The occupant classification system is designed to detect the presence of a properly-seated
f ...
Easy Access Function
When exiting the vehicle, the steering wheel will move away from the driver and
the seat will move rearward when the engine is turned off.
When entering the vehicle, the steering wheel will move to ...
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are requir ...