>

Hyundai Equus: ON/OFF Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: ON/OFF Solenoid Valve Specifications

Specifications
ON/OFF Solenoid Valve
x Control type : Normal low type
Control pressure kpa (kgf/cmx, psi)
539.36
(5.5, 78.23)
 Internal resistance(x)
10~11

    ON/OFF Solenoid Valve Description and Operation
    Description ON/OFF solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. ...

    ON/OFF Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Components and Components Location
    Components 1. Steering Gear Box2. EHPS Motor ...

    Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Fuel Pressure Control Valve Description and Operation
    Description Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on vario ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com