Hyundai Equus: Line Pressure Control Solenoid Vale Schematic Diagrams

Line Pressure Control Solenoid Vale Specifications

Specifications Line Pressure Control VFS x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...

Line Pressure Control Solenoid Vale Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

See also:

Assist Handle Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

Towing service
If emergency towing is necessary, we recommend having it done by an authorized EQUUS dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damag ...

Rear Seat Cushion Cover Components and Components Location
Component Location 1. Rear seat cushion cover [LH]2. Rear seat cushion cover [RH] ...