Hyundai Equus: Line Pressure Control Solenoid Vale Description and Operation

8LR Brake Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Line Pressure Control Solenoid Vale Specifications

Specifications Line Pressure Control VFS x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...

See also:

Overhead Console Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA). 3. Disconnect the sunroof switch conn ...

Description and Operation
Description Automatic transmission system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to ...

Fuel lines, fuel hoses and connections
Check the fuel lines, fuel hoses and connections for leakage and damage. Have an authorized EQUUS dealer replace any damaged or leaking parts immediately. ...