Hyundai Equus: 4&OD Clutch Control Solenoid Valve Description and Operation

6 Speed Clutch Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

4&OD Clutch Control Solenoid Valve Specifications

Specifications Direct control VFS[4&OD/C] x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistanc ...

See also:

Fuel Tank Repair procedures
Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2. Turn the ignition switch OFF and disconnect the negative ...

Refrigerant label
The refrigerant label is located on the underside of the hood. The label contains the following information: Type of refrigerant Amount of refrigerant ...

Rear Disc Brake Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the hose eye-bolt (B) and caliper mounting bolts (C), th ...