Hyundai Equus: Output Speed Sensor Specifications
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Output Speed Sensor Specifications
| Specifications |
| Operation condition (°C)°F | ((-)40~150)) -40~302 | |
| Air gap(mm)in. | 1.3(0.0512) | |
| Output voltage | High | 1.4 |
| Low | 0.7 | |
Output Speed Sensor Description and Operation
Description
The output speed sensor is a vital unit that measures the
rate of rotation of the transmission's turbine shaft and output shaft,
and delivers the readings to the TCM. The sensor pr ...
Output Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
TPMS Sensor Description and Operation
Description
1.
General description
(1)
WU is a sensor placed in the tire that reports pressure and temperature.
(2)
The WU is mounted inside the wheels, fixed to the valve. The angle between ...
Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid should be between MAX and MIN marks on the side
of the gauge at the normal tempe ...
Front / Rear Parking Assist System Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the BCM unit.
(Refer to Body Control Module - "Body Control Module")
Installation
1.
Install the BCM unit.
2.
Conne ...
Categories
Hyundai Equus Manuals
