Hyundai Equus: Output Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Output Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Output Speed Sensor Description and Operation
| Description |
The output speed sensor is a vital unit that measures the
rate of rotation of the transmission's turbine shaft and output shaft,
and delivers the readings to the TCM. The sensor provides critical input
data that's used in feedback control, damper clutch control, gear
setting control, line pressure control, clutch activation pressure
control, and sensor fault analysis.
Transmission Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Output Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltageHigh1.4Low0.7
...
See also:
Front Door Module Repair procedures
Replacement
1.
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
2.
Remove the front door outside handle.
(Refer to Front Door - "Front Door Outside Hand ...
Glove Box Housing Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protec ...
Injector Drive Box (IDB) Repair procedures
Remove
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the IDB cover (A).
3.
Disconnect the IDB Connector (A).
4.
Remove the mounting bolts (B), an ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com