When shift shock is occurred or parts related with the transmission are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
• |
Transmission assembly replacement |
1. |
TCM learning condition
A. |
ATF temperature: 30 ~ 95°C (86 ~ 203°F) |
|
2. |
TCM learning procedure
- |
Repeat the below shift pattern four times or more with stepping on the brake. |
1. |
Drive the vehicle through all gears at D range. Drive from
stop to 1st to 2nd to 3rd to 4th to 5th to 6th to 7th to 8th with
keeping fixed throttle open. |
2. |
Down shift from 8th to 7th, 7th to 6th, 6th to 5th, 5th to 4th, 4th to 3rd, 3rd to 2nd, 2nd to 1st. |
3. |
Repeat the above driving pattern four times or more.
Up-shift throttle open : 15 ~ 30% |
|
Description
Automatic transmission system relies on various measurement
data to determine the current control status and extrapolate the
necessary compensation values. These values are used to ...
See also:
Cluster Fascia Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Rear console storage
To open the console storage, push the open button. After using the console storage,
make sure to close it. ...
Gate operator & Canadian programming
During programming, your handheld transmitter may automatically stop transmitting.
Continue to press the Integrated HomeLink® Wireless Control System button (note
steps 2 through 3 in the Programm ...