Hyundai Equus: Oil Filter Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Oil Filter Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Oil Filter Repair procedures
| Replacement |
| 1. |
Draining ATF totally. |
| 2. |
Remove the oil pan (A).
|
| 3. |
Must be replaced by new oil pan.
|
| 4. |
Adding automatic transmission fluid.
(Refer to "automatic transmission system" in this group.) |
Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled services. If an oil leak is found, perform the oil level chec ...
Valve Body Description and Operation
Description
The valve body is essential to automatic transmission control
and consists of various valves used to control the oil feed from the
oil pump. Specifically, these valves consist of pr ...
See also:
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at high ...
Front Air Strut Assembly Description and Operation
Description
The air spring & damper is one unit so that it is not possible to make separation.
The average pressure of front air spring is around 7.5 bar.
When the front air spring is delive ...
Parking Assist Sensor Schematic Diagrams
Circuit diagram
...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com