>

Hyundai Equus: Oil Pump Components and Components Location - Hydraulic System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Oil Pump Components and Components Location

Components Location

1. Oil seal
2. Reaction shaft
3. Housing
4. Cover
5. O-Ring
6. Reaction shaft
7. Snap ring
8. Needle bearing
9. 8LR/B return spring
10. 8LR/B piston

    Oil Pump Description and Operation
    Description The oil pump rotation builds the hydraulic pressure needed for the lubrication of the various parts of the automatice transmission and operation of the clutch and brakes. The oil ...

    Fluid Components and Components Location
    Components Location 1. Oil injection hole2. Oil level check plug3. Oil drain piug ...

    See also:

    Wheel alignment and tire balance
    The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...

    Rear Bumper Cover Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply pro ...

    High Mounted stop lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear package trim (A). (Refer to Body - "Interior trim") 3. Remove the high mounted stop lamp (A) after removing sc ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com