>
Removal |
1. |
Turn the ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Disconnect the accelerator position sensor connector (A). |
3. |
Disconnect the accelerator control connector (B). |
4. |
Remove the accelerator pedal in the direction of "Removal direction" in the figure after removing the installation bolt (B). |
Installation |
1. |
Install in the reverse order of removal.
|
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.09568-2J100Ball joint removerRemoval of the rear assist arm and tie rod e ...
Fluid Components and Components Location
Components Location
1. Oil injection hole2. Oil level check plug3. Oil drain piug
...
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...