Hyundai Equus: Accelerator Pedal Description and Operation

Filler-Neck Assembly Repair procedures

Removal 1. Disconnect the fuel filler hose (A) and the leveling hose (B). 2. Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim. 3. Remove the rear-LH whee ...

Accelerator Pedal Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Disconnect the accelerator control ...

See also:

Knock Sensor (KS) Schematic Diagrams
Circuit Diagram ...

Heater Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. When the engine is cool, drain the engine coolant fro ...

Auto Defogging Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to ...